1. With local operation and display, active screen saver function;


2. With self-configured network parameters (serial, network port communications, etc.) function;


3. With the function to restore the factory parameter setting;


4. With power-down save / power-on recovery (network parameters, input and output channel selection) function;


5. To provide RF signal M × N non-blocking full switching capabilities and response equipment model query function;


6. Provides the function of responding to the device serial number query


7. In the remote control mode can provide the state (local mode, remote mode) settings, status inquiries and command response function;


8. Provide channel selection settings and response functions.


9. Provide full status query and response capabilities.


Specification characteristics


1.RF port number: a single instrument RF port number will generally not exceed 32 × 32, multiple instruments can be stacked to 256 × 256 ports;


2. Signal transmission direction: fan out;


3. Frequency range: 1.5MHz ~ 30MHz;


4. Isolation between the channels: ≥ 85dB;


5. Common input source mode, the isolation between different user ports: ≥ 50dB;


6. RF port VSWR typical value: ≤ 1.5;


7. Typical noise figure: 8dB @ 32 Road fan-out;


8. Input RF signal gain 1dB compression point typical power value: ≥ 10dBm; The maximum can be upgraded to 20dBm;


9. Transmission gain: 0 ~ 2dB (in-band gain fluctuation typical value: 2dB);


10. Single switch switching time delay: ≤ 10ms;


11. The maximum number of switching: ≥ 1 million times;


12.Remote control interface:  RS-422/485, RS-232, TCP/IP(optional)


13. Operating / Storage Temperature Range: Industry Standard and Military Standard;


14.Mechanical: 1U ~ 6U 19'' standard rack mount


15. Power Requirements: AC 190V ~ 250V 50Hz


16. RF Inpout/Output physical interface: N / SMA / BNC